• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 25 prop shaft overhaul
Albin 25 prop shaft overhaul
I am a new owner of an Albin 25. I would like to go through the prop shaft and put in new seals, rubber bearings, hoses, etc. Does anyone know of an original or after market supplier of these parts. I am re-powering with a Yanmar 3YM30, 29 hp engine and thought this would be a good time to renew the prop shaft. Any suggestions, pitfalls, etc. in overhauling the prop shaft would be appreciated. Thanks, DaveP
-
- Deckhand
- Posts: 6
- Joined: Fri Oct 24, 2008 5:12 am
Now when bying from everywhere around the world is possible You might consider to send your request to Sweden. There is this shop specialised in producing and selling Albin spareparts. Here is the link to their pages. Most of the text is in swedish, but You can send an e-mail in english...
http://www.forsmarin.se/
info@albinmotor.com
http://www.forsmarin.se/
info@albinmotor.com
jorgo