does anyone know where to get parts for the transom shower assembly? I accidentally broke the right-angle 1/2" NPT threaded fitting (on the hot water side).
I have it capped off now with some adapters, but would like to get it replaced. It looks like it might also be used in an RV application.
Thanks, --Dave
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
transom shower parts..
-
- Gold Member
- Posts: 135
- Joined: Wed May 16, 2007 6:51 pm
- Home Port: Key Largo, FL
- Location: Key Largo, FL
transom shower parts..
2006 28te 'Grace Full'
Key Largo, FL
Key Largo, FL
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
-
- Gold Member
- Posts: 135
- Joined: Wed May 16, 2007 6:51 pm
- Home Port: Key Largo, FL
- Location: Key Largo, FL
thanks
I think this is it.. http://replacementboatparts.com/itc97022-a.aspx
I'll have to check teh outside dimensions..
Thanks for the help!
I'll have to check teh outside dimensions..
Thanks for the help!
2006 28te 'Grace Full'
Key Largo, FL
Key Largo, FL
- furball
- Gold Member
- Posts: 352
- Joined: Sun Sep 16, 2007 8:51 am
- Home Port: Chester, Md
- Location: Castle Harbor Marina
- Contact:
Dave,
The transom shower on our 2006 was supplied by ITC RV Inc.
http://www.itc-rv.com/
I think the full unit replacement is about $165. The 90 degree hose fitting/vacuum breaker was broken on ours. Called customer service for parts and ordered the replacement. Nice folks to deal with. The current design is sllightly different so the new parts didn't quite fit. Decided I didn't really need the vacuum breaker so just put a brass 90 in place. I have also purchased a new spray handle , after a friend popped the lever out and over the side while trolling.
Hope that helps.
John
The transom shower on our 2006 was supplied by ITC RV Inc.
http://www.itc-rv.com/
I think the full unit replacement is about $165. The 90 degree hose fitting/vacuum breaker was broken on ours. Called customer service for parts and ordered the replacement. Nice folks to deal with. The current design is sllightly different so the new parts didn't quite fit. Decided I didn't really need the vacuum breaker so just put a brass 90 in place. I have also purchased a new spray handle , after a friend popped the lever out and over the side while trolling.
Hope that helps.
John
Chief
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP