Just purchased a 2002 Albin 32+2 with a Yanmar 370. The tach worked fine on sea trial and no issues reported by the seller. Yesterday I changed the oil, snaking the oil pump jumper cables to the batteries under the dinette. I may have jiggled the sensor. Now the tach clicks a tick on startup but only reads when it gets to around 2000 RPMs, then it seems correct.Can someone tell
me where the sensor is located and what it looks like? Any thoughts? I did remove the dash and tighten the connections but I did not remove or clean them.Any suggestions?
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Tachometer issue Yanmar 6lpa-stp
-
- First Mate
- Posts: 48
- Joined: Sun Jan 18, 2015 10:42 am
- Home Port: Rhode Island