• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Can't get the anchor to go down?

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
paulamaxim
First Mate
First Mate
Posts: 25
Joined: Wed Mar 18, 2015 3:23 pm
Home Port: Stonington, Maine

Can't get the anchor to go down?

Post by paulamaxim »

We are unable to put down the anchor. We use the up/down switch but there is no response. No motor seems to come on.

What else do we do?

Is there a possible electric issue?

We need to try and fix it before Sunday.

Any help is appreciated!
1st Mate Paula Maxim & Capt. Tom Duarte
Top
Carl
Gold Member
Gold Member
Posts: 772
Joined: Tue Feb 27, 2007 6:14 am
Home Port: Oxford, MD
Location: Preston, MD

Re: Can't get the anchor to go down?

Post by Carl »

See the link below, my 28 has this breaker mounted between the throttle and the cup holder. Start there, that is if its a Lewmar.




http://www.lewmar.com/node/11635
28TE "Kozy L"
"How U Albin"
Top
socalmike
Gold Member
Gold Member
Posts: 152
Joined: Mon Sep 28, 2015 5:23 pm
Home Port: san diego

Re: Can't get the anchor to go down?

Post by socalmike »

Had the same issue. It was the contacts. Clean them and check for voltage.
Top
Post Reply

Return to “Albin Maintenance”