• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Yanmar generator

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Porchylad
Deckhand
Deckhand
Posts: 7
Joined: Mon Aug 11, 2014 12:07 pm
Home Port: Portsmouth

Yanmar generator

Post by Porchylad »

Hi guys,

First post!

I'm in the process of buying a 28te, one of only 5 in the uk that we know about!
It seems to have a problem with the generator hunting from full revs to almost dying. However on occasion it will run for half hour or more no problem. Fuel filters have all been checked......

Any ideas :? :?: :?:
N4QC
Gold Member
Gold Member
Posts: 215
Joined: Tue Aug 15, 2006 8:56 pm
Location: Tampa Bay

Re: Yanmar generator

Post by N4QC »

Is it a gas or diesel generator? Model number?

Happy researching,
Joe
Albin Getaway
"LabTime"
Porchylad
Deckhand
Deckhand
Posts: 7
Joined: Mon Aug 11, 2014 12:07 pm
Home Port: Portsmouth

Re: Yanmar generator

Post by Porchylad »

She's diesel, I'll find out the model no today
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Yanmar generator

Post by RobS »

Check the throttle lever, linkage, cable connections. Clean & lube.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Porchylad
Deckhand
Deckhand
Posts: 7
Joined: Mon Aug 11, 2014 12:07 pm
Home Port: Portsmouth

Re: Yanmar generator

Post by Porchylad »

Ok thanks rob will do
N4QC
Gold Member
Gold Member
Posts: 215
Joined: Tue Aug 15, 2006 8:56 pm
Location: Tampa Bay

Re: Yanmar generator

Post by N4QC »

You may also want to have the current owner check out the fuel pick up line within the fuel tank. If it is too low there might be some form of sludge clogging the fuel line. All hose clamps and the fuel gasket at the fuel filter must provide an air tight seal. If the fuel lines are old, they should not be collapsing or be collapsible.

Have fun,
Joe
Albin Getaway
"LabTime"
Porchylad
Deckhand
Deckhand
Posts: 7
Joined: Mon Aug 11, 2014 12:07 pm
Home Port: Portsmouth

Re: Yanmar generator

Post by Porchylad »

Thanks for your comments, gives me something to get my teeth into. It's a YDC 3000c generator by the way
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Yanmar generator

Post by RobS »

Agree on checking the fuel lines. You may find that the ends are dried and cracked but overall they are fine, that's cause the ends are exposed at the cross section and they dry out. Just cut them back an inch or so and like new again.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Yanmar generator

Post by Tree »

Pete,

I agree with whats been said already - its almost certainly a fuel line issue. I am over at the drystack, well ASV today/tomorrow if I have five minutes and you're about I'll pop by
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Porchylad
Deckhand
Deckhand
Posts: 7
Joined: Mon Aug 11, 2014 12:07 pm
Home Port: Portsmouth

Re: Yanmar generator

Post by Porchylad »

Ok thanks all problem seems to be sorted. Blew through fuel line but also topped up fuel. There was only 45 litres in boat so was wondering if generator pick up is higher than main engine which would cause it to loose fuel earlier....?
Post Reply

Return to “Albin Maintenance”