• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

New member - Rebuild

Albin's "power cruisers"
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

Cheap way to do decking in cockpit.
Just pull out the plywood floor panels and sand down then coat with some contact adhesive for good measure.
The self adhesive vinyl flooring comes in 6inch strips form the diy store at $9 for 6 strips - cut them to 2” and caulk with black silicone. All done for $30
(The fiberglass section outside the rear cabin door will get the same treatment - followed by the galley floor)
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
kerrye
Gold Member
Gold Member
Posts: 1022
Joined: Wed Sep 16, 2015 1:12 pm
Home Port: Denver

Re: New member - Rebuild

Post by kerrye »

Very nice. How did you get straight cuts?
dkirsop
Gold Member
Gold Member
Posts: 635
Joined: Fri Nov 08, 2013 10:15 pm
Home Port: Pender Island, BC, Canada

Re: New member - Rebuild

Post by dkirsop »

Great job Hortense! This is similar to what I have on my boat. It works well and you will be very happy with the result.
Hull No. 1013, 1971
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

To cut the strips I turned them upside down and used a very sharp craft knife and a steel straight edge.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
User avatar
Sunsetrider
Gold Member
Gold Member
Posts: 488
Joined: Fri Jun 28, 2013 6:49 am
Home Port: Gananoque ON
Location: Sharbot Lake Ontario Canada
Contact:

Re: New member - Rebuild

Post by Sunsetrider »

Hortense you have inspired me. I am about to paint the cabin interior and will adopt what you did. Great solution. And I hope I can source those stick on vinyl strips here. Could be difficult.
1976 Albin 25 Hull 2529
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

Self adhesive vinyl 3mm thick 150x900mm planksshould be available at most DIY stores.
Be careful to use silicone mastic between the strips and dress it to a concave shape while still wet, with the rear end of the mastic tube. Wait til it dries before you wipe away the surplus that is left on the vinyl either side of the joint - silicone doesn’t adhere to the top surface of the vinyl and it’s easily wiped away when dry.
User avatar
Sunsetrider
Gold Member
Gold Member
Posts: 488
Joined: Fri Jun 28, 2013 6:49 am
Home Port: Gananoque ON
Location: Sharbot Lake Ontario Canada
Contact:

Re: New member - Rebuild

Post by Sunsetrider »

Thanks for the tips, Hortense. Do you have a brand name for the vinyl planks?
1976 Albin 25 Hull 2529
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

I would guess Home Depot would stock this in Canada- I chose beech 150mm x 900 as the closest to a teak colour.
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

After 5 years out of the water and 10 months of weekend refurb she’s back in..
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Sprig1
Gold Member
Gold Member
Posts: 390
Joined: Thu Dec 11, 2014 5:05 am
Home Port: Long Cove Marina, Chester River Maryland

Re: New member - Rebuild

Post by Sprig1 »

Congratulations! Have fun
DesertAlbin736
Gold Member
Gold Member
Posts: 2734
Joined: Sun Mar 09, 2014 3:58 pm
Home Port: Peoria, AZ USA

Re: New member - Rebuild

Post by DesertAlbin736 »

Nice! I like the pair of bucket seats & the kicker motor.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

Now for sale at £10000. Windsor England
kerrye
Gold Member
Gold Member
Posts: 1022
Joined: Wed Sep 16, 2015 1:12 pm
Home Port: Denver

Re: New member - Rebuild

Post by kerrye »

Wow. All that work and now selling?
Hortense
Gold Member
Gold Member
Posts: 41
Joined: Fri Aug 11, 2017 10:09 am
Home Port: Windsor England
Location: Windsor

Re: New member - Rebuild

Post by Hortense »

I know but there is a happy reason - I’ve bought another big boat - a broom 44.
It’s been a happy journey bringing the Albin back from a smelly old hulk that my wife didn’t want to board - to a tidy boat that anyone that knows the marque would be proud of. Our first trip out on the river reminded me of what I missed about a live aboard sized boat.
Post Reply

Return to “A25 / A27 - True Classics”