• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

HB 250 Transmission bearing

Albin's "power cruisers"
Post Reply
User avatar
JT48348
First Mate
First Mate
Posts: 755
Joined: Sun Jul 27, 2014 11:38 am
Home Port: Detroit
Contact:
Contact JT48348

Re: HB 250 Transmission bearing

Post by JT48348 »

To reach into the bilge I have employed the following techniques. Even with the engine and tank out its still tough to reach down that low

1) use a grabber-extender. Like one of those late night tv claw grabber things. If you get the 36" one you can reach pretty far into the bulge

2) a large shop vac with the 2"+ hose and floor extender. I have been able to reach the hose into the bilge sucking up everything there is: water, tools, parts etc. everything gets sucked into the vac bin then you can sift through the bin and review ur catch
Top
Post Reply

Return to “A25 / A27 - True Classics”