We purchased a 1998 Albin 28n this past Summer!!! There are a mid and forward pump installed (none on Automatic)!!! I think there is wiring Aft for another pump (am I correct)? Over this Winter I would like to get the proper pump(s) installed!!!
Any suggestions would be appreciated...
Wilkie
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Bilge Pump(s)???
-
Wilkie
- Gold Member

- Posts: 21
- Joined: Thu Mar 22, 2018 10:30 am
- Boat Make/Model (or None): 1999 28 TE
- Home Port: Swansea, MA.
- Location: Swansea, MA
- catalina_mike
- Gold Member

- Posts: 760
- Joined: Mon Mar 09, 2015 11:20 am
- Boat Make/Model (or None): Albin 28 TE
- Home Port: Dana Point
Re: Bilge Pump(s)???
Our 99 had the mid pump that had a separate switch as it was the diaphragm pump (not a pump with built in switch). The wiring was there to add the stern pump and I did.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
Wilkie
- Gold Member

- Posts: 21
- Joined: Thu Mar 22, 2018 10:30 am
- Boat Make/Model (or None): 1999 28 TE
- Home Port: Swansea, MA.
- Location: Swansea, MA
Re: Bilge Pump(s)???
Mike,
Appreciate your reply!! Yes, my mid pump is a diaphragm pump with a switch on the dashboard!!! I also have a pump forard the that (in the main cabin) which is not automatic!! I plan to make it automatic!! I will also install a pump in the aft. Except for the diaphragm pump are you others automatic as well as manual?
Wilkie
Appreciate your reply!! Yes, my mid pump is a diaphragm pump with a switch on the dashboard!!! I also have a pump forard the that (in the main cabin) which is not automatic!! I plan to make it automatic!! I will also install a pump in the aft. Except for the diaphragm pump are you others automatic as well as manual?
Wilkie
- catalina_mike
- Gold Member

- Posts: 760
- Joined: Mon Mar 09, 2015 11:20 am
- Boat Make/Model (or None): Albin 28 TE
- Home Port: Dana Point
Re: Bilge Pump(s)???
Yes I set them up that way. The wiring should be there. Three wires. One from the fuse for each pump switch that goes automatic via the float position. One from the manual position that goes between the pump and float for manual control (bypassing the float) and the ground.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
- Sisu22
- Gold Member

- Posts: 323
- Joined: Sun May 07, 2017 6:50 pm
- Boat Make/Model (or None): Sisu 22
- Home Port: Ventura, CA
Re: Bilge Pump(s)???
I removed our diaphragm pump because it did not work and was not connected when we got the boat. I have a small automatic pump forward, a 2000 GPH automatic pump just forwarded the fuel tank, and manually activated 2000 GPH pump up against the transom. So only the forward one regularly runs automatically, the midships one is for emergencies, and I run the aft one when I am planing and all the water runs back there.
And the manual Whale pump, too.
And the manual Whale pump, too.
1994 TE 28' w/ Cummins 250
