• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 36 Maxwell HRC10 Windlass question
-
drsogge
- Swabby
- Posts: 3
- Joined: Fri Oct 13, 2023 7:59 am
- Home Port: Warwick, RI. & Mattapoisett MA
- Location: Wrentham, MA
Albin 36 Maxwell HRC10 Windlass question
Does anyone have a Maxwell HRC10 windlass installed on their 36? I would like to know where you mounted the reversing solenoid pack and where you mounted the isolator/circuit breaker? I bought one and getting ready to install it. Says the solenoid should not go into the anchor locker, so now deciding where the best location is. Did you put any reinforcing plate under the bow sprit? My boat has what I think is the original 2inch thick oak sprit. Any other details on your installation would be great. Boat is a 1987. Thanks