• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

28TE/Yanmar prop shaft tube

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Gold Member
Gold Member
Posts: 5
Joined: Tue Jun 01, 2021 11:11 am
Home Port: Weymouth, MA

28TE/Yanmar prop shaft tube

Post by tpilczak »

Hello, all. I am getting ready to do the cutlass bearing on my 2022 28TE with the Yanmar 6LP. Te guy mentoring me though the job has asked for a picture/drawing/diagram/measurements on the prop shaft tube. Everything/anything would be helpful with respect to insight on this job and various measurements (shaft size, length, etc.).

User avatar
Gold Member
Gold Member
Posts: 4040
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY

Re: 28TE/Yanmar prop shaft tube

Post by RobS »

The cutlass bearing is in a cast housing bolted to the skeg keel.
The shaft seal is on the shaft log (tube).
Plenty of info here, use the Search function and you shall find.
Rob S.
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Post Reply

Return to “Albin Maintenance”