• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Generator support in a 28 te engine box model

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
Pirate1
First Mate
First Mate
Posts: 20
Joined: Tue Jun 14, 2022 3:51 pm
Home Port: Washington NC

Generator support in a 28 te engine box model

Post by Pirate1 »

Sorry for the excessive questions….

In the 28 EB model how is the generator placed in front of the engine..how is it supported and kept off the bilge “floor “

I looked at one in Georgia and it appears to be in a pan, attached to a wood base, on the floor of the bilge…….
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Generator support in a 28 te engine box model

Post by Pitou »

Had one in my 28TE engine box forward of the gear as an original Albin install. The install was exactly as you described.

The support tray was painted marine plywood which was as typical, blocks tabbed to the bilge floor and the tray fiberglassed to the tabs and the stainless pan of the generator through bolted to the support tray.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
Pirate1
First Mate
First Mate
Posts: 20
Joined: Tue Jun 14, 2022 3:51 pm
Home Port: Washington NC

Re: Generator support in a 28 te engine box model

Post by Pirate1 »

Thanks
Post Reply

Return to “General Discussion”