• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Modifications, repairs and improvements, 28TE

Post Reply
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Jkraft wrote: Sun Jan 23, 2022 10:16 pm Restriction in your cooling system can also cause premature pump failure.
No restrictions that I know of. Heat exchangers are clean, had the entire raw water system flushed for 2 hours with acid. (Instead of removing each and every heat exchanger)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Next project: Heat damage to the autopilot head.
Will take it in to a shop on Monday and they will make it as new again:

http://seawiremarine.com/
4CAB4B80-C511-4042-BCFA-5B8F58EEE611.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Mini-project today: Trying weather stripping on the L-Hatch below the helm.
Got 1/2" wide, 1/8" thick strips at Amazon for a few Shekels, curious if it will block water from leaking down when washing the boat, :shock:
Will find out next time I give her a bath.
8B5D1594-6507-462C-B4EF-D6C7CB458165.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Autopilot head repaired:
As good as new.
FEBD823E-131C-48F8-9539-7026C70A0314.jpeg
Seawire Marine in Miami did the surgery while I waited at a nearby Cuban breakfast place.
Excellent service and repair:
FB21D849-8419-4BB1-8099-3C5A15AE09D5.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Tree »

Now see if you can find a sun cover for the old girl - you may also find it under the name Autohelm
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Tree wrote: Mon Jan 31, 2022 4:09 pm Now see if you can find a sun cover for the old girl - you may also find it under the name Autohelm
Got all kinds of sun covers for the instruments as well as a bimini top that keeps shade on the instrument panel AND covers over the side windows and the forward windshields.
What you see on the auto pilot is not sun burn, but heat damage:
The summer temperatures after 21 years in Florida will slowly but surely burn the display even without any sun exposure.
See this picture of a boat that is very well protected from the sun.
63782BD8-6D73-44AE-974C-75A9DDA3B46D.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Another mini-project completed:
I purchased new chairs a year and a half ago: They sit taller than the factory
chairs,
hence we needed a small foot rest even at 6'2 (186 cm) and long legs:
Been using a 4" tall storage box for a spare butane stove, but not a good fit
in the long run.
image.jpg
Found a real foot rest on Amazon:
37067B36-6E81-49DA-911C-89C654D09C48.png
Tried it out yesterday and today, comfy and adjustable to 3 "heights"
28BC3CD3-0409-4535-BB78-2E3F34E57461.jpeg
Tried it out on a female crew (Wife could not go yesterday, I am allowed however to take along a single female who loves to boat:))
She liked it too at the next higher level.
9B02A19F-483F-43B5-8BA0-91342DB9B9EB.jpeg

The rest also pivots for toes low/ankles high or vice versa, didn't think I needed the pivot, but feels good.
Highly recommended movable footrest for the A-28TE with the sub-floor.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Picture of portable stove mentioned above:
Same as the galley stove, except "SS".
We use it to cook in the back, using the engine box as a counter and a table.
No fumes and smoke in the cabin and same butane bottles as inside.
(The galley stove is strictly for coffee and tea)
7069454F-8A5B-44B8-92AD-ED82C10BAEF6.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Now that most, if not all of the projects including Upgrades, Repairs, Improvements, etc are done to my 2001 Albin 28TE, it is tempting to add up numbers and see what it all cost: Fairly easy, it is all on the tax records, commercial boat, every expense reported to the tax man in details. (Not being too fancy here with deprecation, cost of money etc)
After I excluded fuel, insurance, registration, taxes, etc., it came to $54,300.00 including yard haul outs and contract labor for cleaning, detailing,
divers for bottom cleaning/running gear. Also included are all the engine services, of which I did most myself. (Not counting my labor, it is free..)
The above is since I bought the boat October 2017, pretty much 54 months, for an average of about $1,000.00 per month.
Adding in fuel, insurance, taxes and dockage could easily be another $7-800 per month.
I paid $67,000 for the tub and could probably sell her today for $95,000 due to a crazy boat market with high demand.
If I did, the monthly cost for the pleasure of boat ownership would have been $1,237 over 54 months, or a total $66,800.
Not a cheap hobby, but it is enjoyable. :oops:
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Toolmanbob1993
Gold Member
Gold Member
Posts: 55
Joined: Sun Sep 20, 2015 1:32 pm
Home Port: Charleston
Location: Easley sc

Re: Modifications, repairs and improvements, 28TE

Post by Toolmanbob1993 »

Norseman,thanks for keeping track of all these repairs and upgrades,i stole many of your ideas..
2000 28 TE “Slow Ride”
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Toolmanbob1993 wrote: Sun Mar 13, 2022 9:00 pm Norseman,thanks for keeping track of all these repairs and upgrades,i stole many of your ideas..
Enjoy.. :mrgreen:

Pretty much done with upgrades and hopefully not many repairs in the near future.
Now routine maintenance, haul out and bottom paint as well as a prop-swap on the menu, probably later in the year.
Have a diver clean the bottom every 2 months, about $70 + $5 tips.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Continued the 9 month engine zinc schedule today.
Did the easy ones first: Intercooler, oil cooler x 2 and the tranny cooler.
The missing zinc was from the oil cooler next to the oil filter.
I poked around with the pinky, did not feel the pencil zinc, either it has disintegrated and crumbled, or the piece (s) fell down to the bottom.
Will pull the filter and the end cap after I am done with the 2 heat exchanger zincs tomorrow.
Never dull...
A97F815D-9E8F-4B87-8F82-29E49C14716A.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

The last 2 zinc pencils are out.
The white one came off the h/e end cap, looks like it has more wear and tear than the other one 5" away, also in the h/e but in the side of the tube.
The end cap pencil is the difficult one.
Had to remove several hoses and also remove the end cap itself.
0681DAD9-6395-4D99-BE1C-0B6F797F7916.jpeg
28FDAEC2-79F3-4D2F-BFC7-DA1F475C47B2.jpeg
692B2E2E-B31A-41B3-8F13-BA1292CC0802.jpeg
Had to order a new gasket, $8.50, also ordered a hose.
Some of the hoses and hose clamps are due for replacement.
Found 3 hoses in the spare parts inventory, the big one retails for $175.00 total for all 3 in todays prices, $238...
(Thanks to former owner, these came with the boat.)
E75AD0E5-3B14-47F1-91EF-32B669A0E1AF.jpeg


Found some gunk in the h/e, over 2 years since I had it flushed with Rydlym acid.
284E85FF-3CAB-4103-91B5-904939922795.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Last edited by Norseman on Sun Apr 24, 2022 3:02 pm, edited 1 time in total.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Update:
Just realized I probably ordered the wrong hose from Yanmar.
Should have done my homework, but instead I jumped the gun:
Told the Sun Power Marine Yanmar dealer I needed the hose from the lower side outlet on the primary heat exchanger.
He said no problem.
7141925D-E053-4F58-8320-B86F085D5FE6.jpeg
Later on in the day I finally found the parts diagram I was looking for:
It had disappeared from my bookmarks:
https://dieselpartseurope.com/media/ond ... 200_en.pdf


The above for the Yanmar 6LP-STE and some variants, but not the 6LPA.

I probably ordered the standard piece instead of the optional hose in the box.
Missed it. (Memo to self: Do your homework and pay attention to details next time :roll: )

Darn..
Guessing I will take the old hose to NAPA and ask if they can match it.
Any other idea? (Does the shaft seal people have adapters for various engines?
Saturday, can't call 'em and find out :roll: )

Nr. 9..
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Modifications, repairs and improvements, 28TE

Post by Norseman »

Broken zinc pencil extracted.
Easy to see why they break off, the angle is screwed up,
The last few years I have been cutting 3/4" of the zinc, but it still broke off. :shock:

6ADBA641-DEB3-4EFD-9779-98186751F02C.jpeg
04BAE1E9-1D6D-4C69-8BB0-61FCCABCF406.jpeg
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
Post Reply

Return to “Tournament Express 26-35”