• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Yanmar 6LP-STE Water Pump Rebuild
Moderator: Jeremyvmd
-
trueworldmarine
- Mate
- Posts: 13
- Joined: Thu Aug 26, 2021 2:58 pm
- Home Port: Oakdale
Re: Yanmar 6LP-STE Water Pump Rebuild
Dock side test today Sept.5 With new raw water hoses and rebuilt water pump went very well. Boat was put to the test running at 3500 rpms there was no longer hose failure or raw water pump failure. The next test will be the sea test under load to test the fuel pump. I'm planning next to replace the hoses after the raw water pump they haven't been changed in 20 years and are earning their keep. I want to replace these hoses with non OEM hoses because of modifications to the engine cooling tube dia.. variations and lengths. Would any one have suggestions in using non oem hoses. I will probably need to get a assortment of 90 degree and 45 degree elbows. Has anyone used the corrugated hoses sold on the market?
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.