• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Wallas Diesel Stove
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Wallas Diesel Stove
Does anyone have experience with the Wallas diesel stove? How well does it work, ease of installation, etc. I am trying to decide on a replacement stove for my A25.
Hull No. 1013, 1971
-
- Deckhand
- Posts: 7
- Joined: Tue May 22, 2012 2:40 am
- Home Port: Orcas Island
Re: Wallas Diesel Stove
I have one in my 2005 28TE. It is a great cabin heater but I don't use it as a cooktop. It's difficult to get the cooking temperature just right, and I don't like cooking inside anyway. It worked great for over 12 years, then failed. I had it serviced at Scan Marine and it worked again for a few weeks, then failed again. It's not worth repairing again for me. I have good enough cabin heat underway, and don't need it at anchor or at the dock. But when it worked it was great.
-
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Re: Wallas Diesel Stove
This was an old post. I have since purchased and installed a Wallas stove and find it excellent for my needs. I put a post up on the A25/A27 site of the installation. Thanks for the insight though.
Hull No. 1013, 1971