• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Rudder Post leakage

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Froggy
Gold Member
Gold Member
Posts: 107
Joined: Sat May 19, 2007 2:14 pm
Location: Riverside, RI

Rudder Post leakage

Post by Froggy »

Hi all,

I have a '93 Albin 28 TE and it has jsut started seeping water around the rudder post. Has anyone else had this prolem and,if so, how did you fix it? I'm hauling her in a week or so for the seasonadn assuming I have to pull the rudder box and re-seal.

Carl
Capt Paul
Gold Member
Gold Member
Posts: 243
Joined: Fri Jul 28, 2006 5:49 pm
Location: San Francisco,CA

Post by Capt Paul »

Carl,

On my 28 TE (1999) the rudder post comes through a stuffing box. Sounds like it's time to change the stuffing material. Doing it during a haul out makes it allot easier. I have never done it so hopefully some one else in group can explain how.

Paul
1999 Albin 28 TE "Antoinette"
Froggy
Gold Member
Gold Member
Posts: 107
Joined: Sat May 19, 2007 2:14 pm
Location: Riverside, RI

Rudder post leakage

Post by Froggy »

Hi Paul,

Thanks for the feedback. Actually,the problem is that it is leaking around the bedding and not the packing of the box. It looks a bit complicated so I'm windering whether anyone has had it done.

Carl
User avatar
Mariner
Gold Member
Gold Member
Posts: 1450
Joined: Mon Apr 17, 2006 11:18 am
Location: Gig Harbor, WA

Post by Mariner »

Haven't done it before, but it sounds like it's kind of the normal deal:
Disassemble, Inspect, Repair, Reassemble

Make sure your yard knows that you may need to drop the rudder when they are blocking. They need to leave the area below the rudder free, and set the boat high enough for you to drop it. Hopefully you don't have to actually drop it, but you never know. Thinking about the way the skeg and rudder are engineered on these boats, I can see where this would represent a challenge for them. The boat needs to be supported on the skeg and keel, so you may even end up having to strap it up when you drop the rudder.
User avatar
gerygarcia
Gold Member
Gold Member
Posts: 215
Joined: Wed May 03, 2006 4:37 pm
Location: South Shore, Long Island
Contact:

Post by gerygarcia »

Froggy

This happened to me two seasons ago. My mechanic said somewhere down the line the rudder shaft was bent and there was a slow leak. :roll:

Over the winter layup they had a whole new piece machined and replaced.
It wasn't a major deal to do, just time to make the new piece and replace and repack.
If you need to know how much it cost to replace, let me know, I can dig up the reciepts.
Resolution 28TE
Gery, Anne, Marissa and Gabby.
Saltdog
First Mate
First Mate
Posts: 60
Joined: Fri Mar 09, 2007 6:39 pm
Location: Portland, OR

Rudder post leak

Post by Saltdog »

I have a 2001 with a box. There is always water in the bilge under the helm. I have assumed it is the rudder post as I can see a little water seeping.

Should the bilge be dry or is it normal to always have a little water in it?

Thanks

TS
Capt Paul
Gold Member
Gold Member
Posts: 243
Joined: Fri Jul 28, 2006 5:49 pm
Location: San Francisco,CA

Post by Capt Paul »

There always tends to be a little water towards the cabin area in my bilge. When moored this is the low spot where everything accumulates. I think most of it seeps in when I clean the boat. Some salt water also gets in under ruff running conditions. You really shouldn't have that much coming in from your rudder post.

That's my opinion anyway.

Paul
1999 Albin 28 TE "Antoinette"
Post Reply

Return to “Albin Maintenance”