• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Portable Generator use

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Portable Generator use

Post by Serenity »

I have a Yamaha 2000 generator that I intend to use while on the hook. When running and plugged into the ac service, I have a slight glow on my "polarity" light on the AC panel in the cabin. This was done while the yacht was on the hard. The wiring is correct. Is it possible that the generator is not grounded and that will cause a polarity issue? When the boat is in the water, I was thinking of using a water guppy anode as the ground. Does or did any other AOG members have a similar problem?
Max
Serenity 98 28TE
East Islip, Long Island, New York
User avatar
rcwhite
Gold Member
Gold Member
Posts: 163
Joined: Mon Jul 28, 2008 7:05 am
Home Port: Southport Maine

Re: Portable Generator use

Post by rcwhite »

Small portable generators can have a floating neutral which is likely the cause of the dim polarity light.
Depending on the unit you can connect the neutral and ground at the generator to address this but
talk to support first. There should only be a single point where neutral and ground are connected
and on a boat, this is on shore. (or onboard generator/inverter when in use and shore power disconnected)
I woudn't put much faith in any of the on board GFCIs when powered off of the portable generator
in this configuration.
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Re: Portable Generator use

Post by Serenity »

Thanks for your input. However, who is "support"?
Max
Serenity 98 28TE
East Islip, Long Island, New York
User avatar
rcwhite
Gold Member
Gold Member
Posts: 163
Joined: Mon Jul 28, 2008 7:05 am
Home Port: Southport Maine

Re: Portable Generator use

Post by rcwhite »

If you are unable to find anything in your manual, you may want to try
customer support which could be the dealer you purchased from or possibly Yamaha direct.

https://www.yamaha-motor.com/corporate/contactus.aspx
(800) 962-7926

If you are unable to find a resolution, typically you could use something like this to replace
the plug on your 15-30 adapter or make your own.

https://www.amazon.com/Progressive-Indu ... B01BYSFQSW

If you do this, do not use the modified adapter for any other purpose than connecting to the
portable generator.

Chris
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Re: Portable Generator use

Post by Serenity »

Chris, great info. I ordered the plug. Will advise the results. Thanks.
Max
Serenity 98 28TE
East Islip, Long Island, New York
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Re: Portable Generator use

Post by Serenity »

I finally had a chance to run my portable genny with the plug mentioned by Chris. Everything worked great. Interesting, I sold Leviton products for 35 years and I never knew that had a plug designed for portable generators.
DSCN1375.JPG
Max
Serenity 98 28TE
East Islip, Long Island, New York
Post Reply

Return to “General Discussion”