Everything I read about Winterization, including Collins' 2015 thread below, concerns engines having closed loop-cooling systems. I'm inquiring about my old seawater-cooled Volvo-Penta MD17C. I once ran my boat's engine on the hard (on her trailer) for her first Springtime pre-launch test by disconnecting the thru-hull inlet hose and feeding it from a bucket filled by a garden hose. Will the same procedure work with pink antifreeze, provided I run enough anti-freeze through the motor is insure the discharge out through the transom is 100% antifreeze?
I've changed rubber coolant pump impellers before, so installing a new one next season is no prob. (I'm told anti-freeze can ruin a rubber impeller)
This is only our 4th season with the Albin-25 and I've always used a marina's services for winterization. Problem is, they are located 100 miles from home, and they charge at least $85/hr for labor.
A friend says his engine costs enough for him to consider a Marina's services downright cheap. Another friend somehow got water in his cylinders (gasoline) last winter, so now he has a new engine. ("ouch"!)
I've also changed engine and transmission oil in the past, so that is no problem at all using the customary a suction pump designed to suck up the used oil through the dipstick tube, after the motor has warmed up during the coolant change..
The potable water tank is not an issue as we use bottled water only on cruises.
My batteries reside in the house over the winter, with frequent charging.
Part of switching to a power boat after a lifetime of sailing is learning how to maintain our big'ol green Diesel myself, and I figure this winterization stuff isn't rocket science, eh?
The bilge and associated pumps are dry over the winter.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Winterizing a 1976 Albin-25 with her original MD17C Diesel?
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 485
- Joined: Fri Aug 19, 2011 5:14 pm
- Home Port: Rockford, IL
-
- Gold Member
- Posts: 2115
- Joined: Fri Sep 22, 2006 7:35 am
- Home Port: Mystic, CT
- Location: New Port Richey, FL
Re: Winterizing a 1976 Albin-25 with her original MD17C Dies
Your plan for winterizing the engine will work. I had a raw water cooled gas engine and did the same thing.
The rubber impeller will be fine but If it's more than 2 or 3 years old I'd replace it.
If your batteries are fully charged they will last all winter without recharging, but trickle charging them won't hurt.
You sound like you are fully capable of doing what the marina charges and arm and leg for. It's called "quality bilge time".
The rubber impeller will be fine but If it's more than 2 or 3 years old I'd replace it.
If your batteries are fully charged they will last all winter without recharging, but trickle charging them won't hurt.
You sound like you are fully capable of doing what the marina charges and arm and leg for. It's called "quality bilge time".
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
-
- Gold Member
- Posts: 772
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: Winterizing a 1976 Albin-25 with her original MD17C Dies
There are different types of potable anti-freeze that will not harm rubber, or are recommended for engines. Hit the link below.
http://newcontent.westmarine.com/conten ... 136_V5.pdf
http://newcontent.westmarine.com/conten ... 136_V5.pdf
28TE "Kozy L"
"How U Albin"
"How U Albin"
-
- Gold Member
- Posts: 2285
- Joined: Wed Nov 13, 2013 10:48 am
- Home Port: Hood Canal, WA
Re: Winterizing a 1976 Albin-25 with her original MD17C Dies
Thank you, Carl. Once again why I belong here.
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Winterizing a 1976 Albin-25 with her original MD17C Dies
How do you plan on doing that? With a refractometer? I use the Extech RF40. Simple, and fun actually!NickScheuer wrote:....provided I run enough anti-freeze through the motor is insure the discharge out through the transom is 100% antifreeze?
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.