We are unable to put down the anchor. We use the up/down switch but there is no response. No motor seems to come on.
What else do we do?
Is there a possible electric issue?
We need to try and fix it before Sunday.
Any help is appreciated!
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Can't get the anchor to go down?
Moderator: Jeremyvmd
-
- First Mate
- Posts: 25
- Joined: Wed Mar 18, 2015 3:23 pm
- Home Port: Stonington, Maine
Can't get the anchor to go down?
1st Mate Paula Maxim & Capt. Tom Duarte
-
- Gold Member
- Posts: 769
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: Can't get the anchor to go down?
See the link below, my 28 has this breaker mounted between the throttle and the cup holder. Start there, that is if its a Lewmar.
http://www.lewmar.com/node/11635
http://www.lewmar.com/node/11635
28TE "Kozy L"
"How U Albin"
"How U Albin"
-
- Gold Member
- Posts: 152
- Joined: Mon Sep 28, 2015 5:23 pm
- Home Port: san diego
Re: Can't get the anchor to go down?
Had the same issue. It was the contacts. Clean them and check for voltage.