• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Peninsular reset button
Moderator: Jeremyvmd
-
Serenity
- In Memorium
- Posts: 598
- Joined: Mon Dec 13, 2010 12:15 pm
- Home Port: East Islip Anglers, New York
- Location: Long Island
Peninsular reset button
My 28 was retro fiitted with a 315 Yanmar from the 300 "Beast". The installer used the same gauges from the Penninsula for the Yanmar with the exception of the tach. In the cluster of the gauges there is a "reset" button. It appears to have no influence on the Yanmar. However, what is its purpose?
Max
Serenity 98 28TE
East Islip, Long Island, New York
Serenity 98 28TE
East Islip, Long Island, New York