Anyone know from experience what the keel construction is (say 10 foot forward of the stern)? Is it fiberglass over wood? How thick (from bottom to top) is the glass below the wood? How thick is the wood? and how thick is the glass above the wood? I am considering a modification to the keel for trailer purposes. My trailer supports the boat from the keel primarily.
thanks,
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A27 Keel Construction
-
- Gold Member
- Posts: 42
- Joined: Wed May 26, 2010 2:57 pm
- Home Port: Cincinnati, Ohio
- Location: Cincinnati, Ohio
A27 Keel Construction
Roger A. Obert
1990 Albin 27 SC
Solitude II
Cincinnati, Ohio
1990 Albin 27 SC
Solitude II
Cincinnati, Ohio
-
- Gold Member
- Posts: 486
- Joined: Sat Sep 06, 2014 1:11 pm
- Home Port: Port of Call Yatch Club
- Location: Astor FL on St John River
Re: A27 Keel Construction
Do not know if this will be of any help, but you might check the information posted by greatlaker221 on keel. He got pretty deep into it. Thanks, Mark
-
- First Mate
- Posts: 221
- Joined: Fri Feb 22, 2013 5:12 pm
- Home Port: Biloxi MS
Re: A27 Keel Construction
Mine sits on the keel on it's trailer too - at least 95% of the weight, with side supports for stability. I'd be very surprised to find there was any wood at all in the keel. I drilled three 3/8ths holes in the aft end of then keel to attach a strap to the rudder and it was all solid glass there. Many owners have added depth sounder transducers inside the keel at various points and they would not work well if there was any wood in the keel. I would bet it's a solid glass layup running the length of the boat
Don
Don
- tego
- Gold Member
- Posts: 454
- Joined: Thu May 09, 2013 2:22 pm
- Home Port: Cherokee Resort and Marina - Tellico River near Vonore, TN
- Location: Maryville, TN
Re: A27 Keel Construction
Roger, I'm sure mine (87 FC) is solid glass and about 5/8" thick. No problem resting on the keel. Ben
- sail149
- Gold Member
- Posts: 344
- Joined: Sun Nov 08, 2009 5:30 pm
- Home Port: Stuck at home on trailer! Chesapeake bay intended....
- Location: Eastern PA
Re: A27 Keel Construction
Hi
My '84 a27ac has no wood in the keel area. I drilled a 2" hole about 18" fwd of the prop shaft 2" from bottom to fut a so called gar board drain. The hull was barely 1/8" thick" . I had hoped it might nave been a little thicker.
But boat is 30 yrs old so I guess it works.
My '84 a27ac has no wood in the keel area. I drilled a 2" hole about 18" fwd of the prop shaft 2" from bottom to fut a so called gar board drain. The hull was barely 1/8" thick" . I had hoped it might nave been a little thicker.
But boat is 30 yrs old so I guess it works.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Warren
'84. 27AC. Lehman 4D61
'84. 27AC. Lehman 4D61