Where do I get parts for 1984 61 hp Lehman?

martingaf · Post by **martingaf** » Sat Jun 15, 2013 7:02 pm

rwcoulter wrote:Does anyone know the correct operating temp for this engine? Mine runs around 175-180 until I really push it and then it will climb to 195-200. I've been told that 190-200 is good for that engine. The theory being that it needs to run hotter to cut down on smoke.

86degrees C or 187 but a little hotter does not hurt

Post by **smacksman** » Tue Mar 17, 2015 12:02 pm

An update two years later - the link http://www.pumpvendor.com times out and http://www.depcopump.com will not find the pump kit item #.
www.americandieselcorp.com has gone too.

Post by **eseyoung** » Wed Mar 18, 2015 8:25 am

As far as i know Bob Smith is still in business...his website (American Diesel) was never much to begin with. it basically had one page, with his address and number on it.

He is old school and prefers to do things over the phone. He has a username here but rarely posts, i talked to him late summer/early fall and he, at that point had no intention of closing or stopping support of the Lehman.

It is definitely worth your time to call and talk to him.

contact info:
101 American Drive
Kilmarnock, VA 22482
Phone: (804) 435-3107

Post by **smacksman** » Wed Mar 18, 2015 11:53 am

eseyoung wrote:As far as i know Bob Smith is still in business...his website (American Diesel) was never much to begin with. it basically had one page, with his address and number on it.

He is old school and prefers to do things over the phone. He has a username here but rarely posts, i talked to him late summer/early fall and he, at that point had no intention of closing or stopping support of the Lehman.

It is definitely worth your time to call and talk to him.

contact info:
101 American Drive
Kilmarnock, VA 22482
Phone: (804) 435-3107

That is excellent news - many thanks.
I fly UK to Charleston, SC next week to step on board for the first time.
I'll give Bob a call when I arrive.
I like 'old school'.

martingaf · Post by **martingaf** » Sun Aug 02, 2015 9:46 pm

I have a complete 4d61 with 1600 hours on it for sale if anyone is interested

Post by **Robert M** » Sat Aug 15, 2015 10:41 pm

Is This Engine still for sale I am in need of a replacement 4d61 Thanks Robert M

Post by **Vic K** » Wed Sep 02, 2015 9:29 am

Don: The pump is a Johnson 10-24119.

I have a new thermostat in the box for the 4D61 on my boat. Next time I go to the marina I'll try to remember to write down the info and post it. Bug me if I forget. I don't know if anyone else has mentioned Rockauto on line as a source for Peugeot engine parts.

Vic

Post by **Vic K** » Sat Sep 05, 2015 10:46 pm

Someone was looking for info re thermostat for the 4d61: MotoRad part no 238-70

Post by **DCatSea** » Sat Nov 07, 2015 9:42 am

Just got the available parts list from Brian at American Diesel. It's his 2006 list, but he will gladly update prices.

Good luck

Post by **rnummi** » Sun Dec 27, 2015 10:14 am

Did someone post the NAPA part number for the glow plugs for the 4D61?

Beta Don · Post by **Beta Don** » Mon Dec 28, 2015 7:31 pm

NAPA sells the NGK 6929 glow plug which fits the Peugeot 504 auto diesel for $22.99 each

http://www.napaonline.com/Catalog/Resul ... %2b2054004

I would test the ones in your engine first - Disconnect the wiring so you can measure each individual plug with an ohmmeter. If they measure nearly a dead short, they are good - If you get a high resistance or an open, it's burned out

Don

hardalee1 · Post by **hardalee1** » Fri Jan 22, 2016 2:57 pm

DCatSea wrote:Just got the available parts list from Brian at American Diesel. It's his 2006 list, but he will gladly update prices.

Good luck

I called American Diesel, no parts for this engine any more.
Anyone know of any other place now?

Post by **rnummi** » Sat Jan 23, 2016 11:16 am

Ruh roh..... Google indenor diesel. I better start hunting for a water pump. I don't know if one exists, but it would sure be marvelous if someone could compile a "here's the NAPA/Advance/PeP part number...." For the 4D61...

Has anyone already done this?

There's also a place in Georgia (I think) that rebuilds them.

Post by **Sprig1** » Sat Jan 23, 2016 7:30 pm

I got my water pump off of eBay and another one from rock auto. Wasn't planning on two but I messed up. Now I have two spares. What's got me is the water hoses on the front of the engine. I just found the banjo fuel lines the other day that where coast guard approved. I thought that was a major accomplishment. The next project for me is pulling the fuel tank. I'm going to do that while the thruhalls are removed so I can run the siphon hose thru them and into a barrel. Then I want have to use a pump.

Post by **rnummi** » Sun Jan 24, 2016 12:58 pm

OK, I give up... what's a "banjo" fuel line?

For the rst of the world, I compiled the following so far:

Peugeot XDP 90 2112cc off a Peugeot Diesel 504 0r 505
Lancing Marine UK sells parts for it
NAPA Timimg Belt #XL 25-11485/9451
The Thermostat is Motorad 238-170
Johnson Pump FSB9 1024119
Glo Plugs are NAPA NGK 6929

Feel free to add your part and numbers to the list and where you got the Part

Albin Owners Group

Albin Owners Group

Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?

Re: Where do I get parts for 1984 61 hp Lehman?