Good afternoon,
I recently acquired a 2000 Albin 31TE. It is powered by a single Caterpillar 3126, rated at 420 HP. Can anyone tell me what is the proper propeller size for this boat? Diameter and pitch? Number of blades? Any cup?
Thanks,
Bob
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
prop size
Moderator: Jeremyvmd
-
bobhodgemarine
- Swabby
- Posts: 1
- Joined: Wed Oct 01, 2014 4:49 pm
- Home Port: St. Petersburg, FL
-
Serenity
- In Memorium
- Posts: 598
- Joined: Mon Dec 13, 2010 12:15 pm
- Home Port: East Islip Anglers, New York
- Location: Long Island
Re: prop size
Bob, I would check with your local or nearby propeller re-conditioner guy. My prop came from Dymex in Michigan through a local guy on Long Island.
Max
Serenity 98 28TE
East Islip, Long Island, New York
Serenity 98 28TE
East Islip, Long Island, New York