• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Macerated

Post Reply
User avatar
DougSea
Gold Member
Gold Member
Posts: 2762
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: Macerated

Post by DougSea »

Should be in the bilge area under your helm seat.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Macerated

Post by RobS »

They were not all equipped with one. Start at the sanitation house thru hull fitting and work backwards.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
JackK
Gold Member
Gold Member
Posts: 465
Joined: Fri Jun 30, 2006 8:14 am
Home Port: Portsmouth, Rhode Island
Location: Plainville, MA

Re: Macerated

Post by JackK »

RobS wrote:They were not all equipped with one. Start at the sanitation house thru hull fitting and work backwards.

Sanitation house, now that's cute ... I so wished I could edit and put sh%t house :roll:
former boat .. 2003 28 TE Flushdeck Dogonit
special k
Gold Member
Gold Member
Posts: 315
Joined: Fri Mar 06, 2009 3:37 pm
Home Port: mystic
Location: tolland, ct

Re: Macerated

Post by special k »

shouldn't be hard to pinpoint. in the plumbing between holding tank and discharge thru-hull. mine mid ships starboard side....2002 28te
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Macerated

Post by Tree »

Out of interest, is the macerator only for the holding tank? In 30 years of boating, I've never had the need to use the heads for that reason :oops: and also discharge laws over here aren't as tight as they are over there - holding tanks are not really that common on smaller boats here
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Re: Macerated

Post by Serenity »

Tree, I can understand why the guys over on the other side of the pond don't need discharge regs. You're an Island in the ocean. The best part is all of that good stuff travels south along Africa, to the Bahamas and then up the Gulf Stream. I suppose that explains why our fish have that "European" taste to it . :D However, a good glass of cab makes it all good. My macerator is on the starboard side, under the helm.
Max
Serenity 98 28TE
East Islip, Long Island, New York
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Macerated

Post by Tree »

Another, probably silly question. When the holding tank is full, how do you empty it? I am pretty sure that is where we are getting a bit of a pong from so I would like to clean it out but am unsure how it is supposed to be emptied?
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
DougSea
Gold Member
Gold Member
Posts: 2762
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: Macerated

Post by DougSea »

You should have a deck plate, most likely on the starboard side, labeled "Waste". The "contents" are vacuumed out at a pump out station. Many marinas over here have one or two and there are traveling pump out boats that also do this service.

Depending on the type of tank you have the pump-out fitting could be teed into the overboard pump or it could be a separate fitting on the tank.

http://captnmike.com/2013/04/22/beating ... ion-blues/
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Macerated

Post by Tree »

That's what I assumed but don't know anywhere local that can pump out. I've put a small amount of solution in the tank that is supposed to kill the bacteria for the time being to see if that makes a change.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
DougSea
Gold Member
Gold Member
Posts: 2762
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: Macerated

Post by DougSea »

Tree wrote:That's what I assumed but don't know anywhere local that can pump out.
Some googling brings up Port Solent Marina and Gosport Marina. Both list "pumpout" in their services.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Macerated

Post by Tree »

Funny enough, Gosport is my marina! No idea where its done though - I'll ask the Mark the marina manager where I need to take the boat to get it done - we have about 800 boats here.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Macerated

Post by RobS »

I good wet vac should do it. Don't use yours though, borrow a friend's!
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Macerated

Post by Tree »

RobS wrote:I good wet vac should do it. Don't use yours though, borrow a friend's!

good call!
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
JackK
Gold Member
Gold Member
Posts: 465
Joined: Fri Jun 30, 2006 8:14 am
Home Port: Portsmouth, Rhode Island
Location: Plainville, MA

Re: Macerated

Post by JackK »

Tree wrote:Another, probably silly question. When the holding tank is full, how do you empty it? I am pretty sure that is where we are getting a bit of a pong from so I would like to clean it out but am unsure how it is supposed to be emptied?
Be careful killing off the bacteria in the holding tank. I got the bright idea of adding bleach one spring to clean the tank out. It killed all of the good bacteria that help keep the odors down. For almost a month anytime some pumped the head, the smell would drive everyone else overboard. It was not very conducive to guests on board :oops:

I ended up rinsing the tank repeatedly and then adding a product call Odorloss and I haven't had a problem since.

Jack
former boat .. 2003 28 TE Flushdeck Dogonit
User avatar
DougSea
Gold Member
Gold Member
Posts: 2762
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: Macerated

Post by DougSea »

Tree wrote:Funny enough, Gosport is my marina! No idea where its done though - I'll ask the Mark the marina manager where I need to take the boat to get it done - we have about 800 boats here.
After reading this I took a nice google tour of the area. Looks like quite the area!

https://www.premiermarinas.com/~/media/ ... b2014.ashx

https://maps.google.com/maps?ll=50.7931 ... sic&dg=opt
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Post Reply

Return to “Tournament Express 26-35”