I have a clogged high pressure vent which is located on the back side of the expansion tank of a 4D71. I'm trying to clear the build up with CLR and a pick. Has anyone else had this experience? Wonder as to the size of the hole and is it straight into the lip of the pressure cap tube or its it angled, curved? Any info would be appreciated.
Vic
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Clogged high pressure vent 4D71 fresh water side
Moderator: Jeremyvmd
-
Vic K
- Gold Member
- Posts: 248
- Joined: Sun May 13, 2012 9:17 am
- Home Port: Houston