My 28 has an IMTRA windlass control system. The Pull Off/Push On button is very difficult to pull out so I think it is time for a replacement.
It appears that the switch is actually a 70 amp breaker from ETA or E-T-A. But the part #s shown on the device aren't popping up on E-T-A's website.
I can spec an appropriate replacement on my own but if anybody else has the original part # it would be greatly appreciated.
Many thanks.
DGH
P.S. In the meantime I sprayed the breaker with some lubricant and tried to work it in...We'll see...
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Windlass Control System
Moderator: Jeremyvmd
-
Pasteur
- Gold Member
- Posts: 71
- Joined: Sun Apr 24, 2011 5:29 am
- Home Port: Jamestown, RI
Windlass Control System
Zero PSI and Zero PSII
2006 28TE FD, Yanmar
2004 31TE, Twin Yanmars
Jamestown, RI
2006 28TE FD, Yanmar
2004 31TE, Twin Yanmars
Jamestown, RI