V berth table pedistal for 28TE

Post by **JoeH** » Tue May 25, 2010 8:17 pm

My original V berth table pedistal needs to be replaced. Does anyone know of a replacement. The original never worked properly and frankly should have been replaced a couple of years ago.

Thanks in advance.

Joe H

Post by **RobS** » Tue May 25, 2010 8:22 pm

Hope this helps: viewtopic.php?f=7&t=3342

Post by **Cape Codder** » Thu May 27, 2010 8:14 am

Joe H
I should have an answer today regarding the table pedestal.
I'll post and send you an email

Post by **JoeH** » Fri May 28, 2010 2:20 pm

Bob: Thanks for the quick response. I look forward to your suggestion. Have a great holiday, if you're ever in then Scituate area look me up.

Joe H

Post by **Cape Codder** » Fri May 28, 2010 9:07 pm

Here is the message I rec' d today from Pier Supply:

Good Morning,
Thanks for your patience. I was able to find a Z80-2603VEL not listed in the catalog. It extends 10-15/16" X 24-15/16" and should work and the same price as the Z80-2600. $177.00
Otherwise the Z80-2800 is $208.99.

Jan
Pier Supply
931-303-5277

So I ordered the Z80-2603VEL, and returning the Z80-2600VEL which was too long (high) for my table, and would not let it down low enough for the V-
berth

tomtutton · Post by **tomtutton** » Sun Jul 25, 2010 3:40 pm

We have a 1998 28' TE and had to replace the pedastal a couple of years back. The units are made by Forespar (I believe in Calif) Our only mistake was in not sending them the height up and down. It came in a little over an inch too short--we had a local yard make a teak spacer that we put between the unit a the table--works great
Tomcat

Albin Owners Group

Albin Owners Group

V berth table pedistal for 28TE

V berth table pedistal for 28TE

Re: V berth table pedistal for 28TE

Re: V berth table pedistal for 28TE

Re: V berth table pedistal for 28TE

Re: V berth table pedistal for 28TE

Re: V berth table pedistal for 28TE