• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Albin 25' curtain rod holders

Albin's "power cruisers"
Post Reply
Brian
Gold Member
Gold Member
Posts: 82
Joined: Tue Jan 12, 2010 7:38 pm
Location: Halfmoon Bay, BC
Contact:

Albin 25' curtain rod holders

Post by Brian »

I'm repairing / re fastening some of the curtain rod holders inside.
The screws used are only 1/4" and don't have much "bite".
By the specs on the window rubber in another thread here, it sounds like the FRP cabin thickness around the window areas is 3/16".
Is this correct? I don't want to use screws that are too long!!!
Thanks
User avatar
leprof31
Gold Member
Gold Member
Posts: 81
Joined: Fri Jul 24, 2009 1:53 pm
Location: Trois-Rivieres, Quebec

Re: Albin 25' curtain rod holders

Post by leprof31 »

It is my understanding... You sould try making an Epoxy glue bed for the plastic holder...

You should get this information too:

You can get them from Watski as well (I bought 12 brackets last year, and they are exactly the same as the orginal) :
www.watski.no or www.watski.se
GARDINSTANG
Gardinstang i 10 mm aluminiumsrør. Lengde: 2,5 meter. Oppheng i hvit nylon.
69460-10
Stang
69460-11 Oppheng 1 stk.
69460-11-4 Oppheng i pk. 4 stk.
The following part number is a set of 4 curtain rod brackets:
69460-11-4 Oppheng i pk. 4 stk.
The following part number is the curtain rod:
69460-10
Stang
The following part number is one curtain rod bracket:
69460-11 Oppheng 1 stk.
Best regards/Mvh
Bjørn Lie
Post Reply

Return to “A25 / A27 - True Classics”