• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Depth sensor

GPS, Sonar, Radar, Fishfinder, etc. Discuss electronics installation and upgrades.
Post Reply
Casco Bay
Mate
Mate
Posts: 16
Joined: Wed Jan 06, 2010 8:49 am

Depth sensor

Post by Casco Bay »

Where have you guys found the best place to mount a transducer to give reliable readings at speed. I have heard they can be difficult to locate well on the 28. Any ideas?
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Depth sensor

Post by Pitou »

Congratulations on the new boat and welcome to the AOG. Are you engine box or flushdeck?

Last spring there was a good discussion regarding this on the 28. Here is the thread ... :arrow: viewtopic.php?f=27&t=2305&hilit=transducer I mounted the new AirMar angled ducer forward of the engine close to the centerline, port side as instructed by Airmar. The photos by RobS will show the location. All last season I never dropped a sounding at any speed .... good luck.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
Post Reply

Return to “Electronics”