Does anyone know the air clearance of a 1979 Albin 36 with the mast up? I need to go under a bridge with 24 feet clearance and I am wondering if I will make it or take down the mast.
Thanks,
Ed
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
air clearance
Moderator: Jeremyvmd
- Mariner
- Gold Member
- Posts: 1450
- Joined: Mon Apr 17, 2006 11:18 am
- Location: Gig Harbor, WA
The best thing I can suggest is to construct a cheap. lightweight, wooden frame that is 24' tall, and wide enough to fit around your boat. Then, with the help of a deckhand align the bottom of the frame with the surface of the water, and see if it will clear the top of the boat.
My guess? 24' is pretty high. I'd be surprised if a 36' powerboat wouldn't fit under it.
My guess? 24' is pretty high. I'd be surprised if a 36' powerboat wouldn't fit under it.
- edduffy
- Swabby
- Posts: 4
- Joined: Sun Apr 27, 2008 11:55 am
air clearance
Well I was able to push a wide tape measure up the mast to the anchor lite. Then measure from the upper deck to the water line. I came up with 22'. So I should be able to get under 24 foot bridge without any problems.
Thanks,
Ed
Thanks,
Ed
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact: