We have an '89 Albin Sportfisher. We have had serious vibration and found out that the drive shaft is damaged. Does anyone have any information about this shaft - specs, etc.
Also - where can I get more information on this?
Thanks,
Jeanne G.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Drive Shaft - 1989 Albin Sportfisher
Moderator: Jeremyvmd
-
Legacy
- Gold Member
- Posts: 411
- Joined: Mon Apr 17, 2006 1:40 pm
- Home Port: Boston, MA
- Location: Boston
- Contact:
Shaft & Prop balance
Sounds like you need to have the shaft and propeller tuned & balanced before bad things happen. Check out companies like H&H Propeller for information, they did a lot of work with Albin. www.hhprop.com It's not as daunting as it sounds.
Good luck.
Rick
Good luck.
Rick
Rick
1998 Albin 35TE
"Legacy"
1998 Albin 35TE
"Legacy"
-
jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact: