Hi folks. Happy holidays
I am repowering my Albin 32+2 from Yanmar to Cummins.
I badly need information about transmission, gear ratio, and accessories which are dependent on Cummins engine.
Please guide me!
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Needed info on Cummins engine for Albin 32+2
-
- Gold Member
- Posts: 40
- Joined: Mon Jan 11, 2010 9:56 pm
- Home Port: Stamford CT
- Location: Stamford, CT
- Contact:
Needed info on Cummins engine for Albin 32+2
Meyrick Payne
Albin 32+2
"Ancora"
Stamford, CT
Albin 32+2
"Ancora"
Stamford, CT
-
- Gold Member
- Posts: 11
- Joined: Fri Oct 20, 2017 11:18 am
- Home Port: Matawan Creek, New Jersey
- Contact:
Re: Needed info on Cummins engine for Albin 32+2
Hello Ancora,
I repowered my 32 Sportfish with a 6BTA 315hp. I utilized the existing gear and V drive as the boat was previously Cummins powered. I have a Velvet Drive S-7000 gear which has a 1.12/1 ratio coupled to a Walters V-Drive Model RV-50 (jack shaft version) with a ratio of 1.47/1. These two ratio's result in a final reduction of 1.65/1. I re propped to a Dynablade Nibral 21 X 22 4 Blade LH. I fast cruise comfortably at 19 Kts @ 2300 rpm. Max speed is 24 Kts at 2800. Slow cruise is 14 Kts @ 2000 RPM. I hope this helps.
I repowered my 32 Sportfish with a 6BTA 315hp. I utilized the existing gear and V drive as the boat was previously Cummins powered. I have a Velvet Drive S-7000 gear which has a 1.12/1 ratio coupled to a Walters V-Drive Model RV-50 (jack shaft version) with a ratio of 1.47/1. These two ratio's result in a final reduction of 1.65/1. I re propped to a Dynablade Nibral 21 X 22 4 Blade LH. I fast cruise comfortably at 19 Kts @ 2300 rpm. Max speed is 24 Kts at 2800. Slow cruise is 14 Kts @ 2000 RPM. I hope this helps.