Modifications, repairs and improvements, 28TE

Post by **Nancy** » Mon Apr 13, 2020 7:54 pm

Love that faucet!

What are we going to do about replacement sinks when the time comes? Can't find this size anywhere.

Post by **Norseman** » Mon Apr 13, 2020 8:02 pm

Nancy wrote: ↑Mon Apr 13, 2020 7:54 pm Love that faucet!

What are we going to do about replacement sinks when the time comes? Can't find this size anywhere.

Be nice to your sink and it should last: My sink has no dents, no scratches and no damage after 19 years.
Same with head sink, looks good, be gentle and life is good.

Post by **Norseman** » Tue Apr 14, 2020 5:55 pm

Got the connectors from Scandvik today, (UPS ground was overnight, wow..

)

Hooked up, no leaks. All good.

DC315966-D8F7-48AB-B2AE-684855ADE68E.jpeg

Post by **Norseman** » Thu Apr 16, 2020 11:01 am

Next project is the cabin and head flooring.
Got the original carpets, both unused and in good shape, but thinking more of fake decking, or foam like SeaDeck: SD came to the boat and measured, gave me a total estimate of about $850 including installation, taxes, etc using the same faux teak I have on the cockpit/wheel house.
Also considering this stuff:

19A98F38-B172-4AB4-8555-1DCE6EE59C5F.jpeg

Any recommendations for low maintenance flooring, let me know.

Post by **Norseman** » Thu Apr 23, 2020 3:56 pm

New PERKO raw water strainer basket today, got it’s own thread,
http://www.albinowners.net/aog/viewtopi ... 036#p82036

Post by **Norseman** » Thu Apr 23, 2020 4:02 pm

Norseman wrote: ↑Thu Apr 16, 2020 11:01 am Next project is the cabin and head flooring.
Got the original carpets, both unused and in good shape, but thinking more of fake decking, or foam like SeaDeck: SD came to the boat and measured, gave me a total estimate of about $850 including installation, taxes, etc using the same faux teak I have on the cockpit/wheel house.
Also considering this stuff:19A98F38-B172-4AB4-8555-1DCE6EE59C5F.jpeg

Any recommendations for low maintenance flooring, let me know.

Decided on SeaDek.
Asked them to sharpen the pencil a bit a give me a better estimate:
They did and I ordered these:

0A5B9ED0-1EFA-48A1-9C1B-462B4458B3FB.png

Post by **Norseman** » Mon May 04, 2020 6:35 pm

Time to clean the instrument and fuse panel:
Been lazy lately but these corona days I have plenty of time.
Been thinking about replacing the whole panel, all new stuff, breakers, no fuses and playing with the idea, but an expensive project in Fort Lauderdale: The best shop in town, Wards Marine Electronics cater to Mega Yachts (80 feet +)
The rest of us are paying Mega Yacht prices.

Before cleaning:

98DCD07F-04AB-4B1C-B785-D06E93E6A6DA.jpeg

03035AE3-7BE1-4235-B7B7-BE1D6EC2949D.jpeg

After cleaning:

7A70FB34-BC11-4544-A6A9-CA0501F93750.jpeg

Used a soft toothbrush and “invisible glass” window cleaner.

Anybody have a source for the labels?
A few are beyond their due date, but hate to buy a kit of 100 labels just to replace 1 or 2.

Post by **Pitou** » Mon May 04, 2020 9:35 pm

I've used exact sized "large labels" from Blue Sea Systems and ordered direct from them online. The site now says direct ordering is down and to order from a dealer .. I guess that works to.

https://www.bluesea.com/products/category/8/Labels

Post by **Norseman** » Tue May 05, 2020 12:40 pm

Pitou wrote: ↑Mon May 04, 2020 9:35 pm I've used exact sized "large labels" from Blue Sea Systems and ordered direct from them online. The site now says direct ordering is down and to order from a dealer .. I guess that works to.

https://www.bluesea.com/products/category/8/Labels

Thx Kevin: I checked out the Large Labels, only one for Bilge Pump, hoping to find the original labels with a little opening for the red light.
Will keep on looking.

Post by **Norseman** » Tue May 05, 2020 12:45 pm

New cabin flooring today, SeaDek, same stuff I have on the cockpit decking and swim platform.

6B76EC3A-9EE3-4C64-96BD-9F52EBFDE56D.jpeg

Post by **Pitou** » Tue May 05, 2020 2:59 pm

SeaDek looks nice.

If the size is right on the Blue Sea labels .. measure twice, punch once.

Post by **Norseman** » Tue May 05, 2020 4:57 pm

Pitou wrote: ↑Tue May 05, 2020 2:59 pm SeaDek looks nice.

If the size is right on the Blue Sea labels .. measure twice, punch once.

Yeah, a hole puncher would do the job.
Wife is an artist and former Creative Director at big advertising firms, she should be able to make me a couple of labels: Honey Dues for wifeys.

Post by **Norseman** » Fri May 08, 2020 1:58 pm

Descaled the Yanmar today: www.overheat.com charged $500 and did a good job from what I can tell. (All 5 coolers got cleaned as well as tubing, etc.)
They also have locations in New England and one in Spain.

B801C4BC-7694-4495-8B15-1CC5885FEF7F.jpeg

4864880C-423B-4AD5-B2FE-0DCE64B55383.jpeg

4DE771E6-EF5D-4ACC-A679-50A6FDA4D760.jpeg

Larry cessna · Post by **Larry cessna** » Wed May 27, 2020 3:04 pm

Anyone know what type of fuse cap these are. I need tp replace 3

Post by **Norseman** » Wed May 27, 2020 3:36 pm

Larry cessna wrote: ↑Wed May 27, 2020 3:04 pm Anyone know what type of fuse cap these are. I need tp replace 3

Looks like these, but not certain..

86417126-1F0E-49D0-8A6F-821DBC749408.png

Albin Owners Group

Albin Owners Group

Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE

Re: Modifications, repairs and improvements, 28TE